Wired Router NETGEAR PR460X-111EUS 10 Gigabit Ethernet IEEE 802.1Q

The NETGEAR PR460X-111EUS is a wired router designed for environments that require high-throughput 10 Gigabit Ethernet connectivity and advanced network protocol support. It implements IEEE 802.1Q for VLAN tagging and provides Ethernet LAN data rates of 10, 100 and 1000 Mbit/s on its RJ-45 ports. The router includes robust routing protocols and VoIP support, combined with strong security algorithms and firewall features for controlled and reliable network operation. The device is offered in a black housing and has a compact footprint suitable for rack or desktop deployment where a stable wired core is required.

Advantages

The PR460X-111EUS integrates 10 Gigabit Ethernet capability with support for IEEE 802.1Q VLANs to separate and manage traffic efficiently. Routing functions include RIP-1 and RIP-2 for dynamic route exchange, while SIP ALG provides basic assistance for VoIP traffic. Security is supported by cryptographic algorithms including 3DES and AES for confidentiality and SHA-1/SHA-2 for integrity, together with firewall mechanisms such as traffic rules, port forwarding and stateful packet inspection to control inbound and outbound flows. An ARM processor and eMMC storage provide the processing and local storage resources required for steady operation.

Suitable for

• Small to medium enterprise wired networks requiring 10 Gigabit uplinks
• Environments that use VLAN segmentation (IEEE 802.1Q) for traffic separation
• Deployments that need basic VoIP support and SIP ALG
• Network setups requiring hardware firewall features and cryptographic protection

Key specifications

• 10 Gigabit Ethernet connectivity
• Ethernet LAN data rates: 10 / 100 / 1000 Mbit/s on RJ-45 ports
• IEEE 802.1Q VLAN support
• Routing protocols: RIP-1, RIP-2
• VoIP support via SIP ALG
• Security algorithms: 3DES, AES, SHA-1, SHA-2
• Firewall features: traffic rules, port forwarding, stateful packet inspection
• Processor architecture: ARM
• On‑board storage: eMMC
• Physical colour: Black
• Ethernet LAN (RJ-45) ports: 5
• Weight: 1.484 kg

How to use

Install the NETGEAR PR460X-111EUS in a suitable location with access to required uplink and LAN cabling. Connect the 10 Gigabit uplink and RJ-45 LAN ports to network switches or devices as needed. Access the router’s management interface to configure VLANs using IEEE 802.1Q, enable routing with RIP-1 or RIP-2 where appropriate, and set up SIP ALG for VoIP traffic if required. Configure firewall policies, traffic rules and port forwarding to match your security and access requirements. Ensure firmware and configuration backups are stored on a secure system and eMMC contains the device’s local data as configured.

Usage recommendations

For optimal performance, use quality Cat6a/Cat7 cabling for 10 Gigabit links, keep firmware up to date, and apply least-privilege firewall rules. When deploying VLANs, plan addressing and routing to avoid overlaps and ensure SIP ALG is tested with your VoIP provider as ALG behaviour can vary between implementations.